Licensed & Insured, in Portland and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Portland
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (971) 754-2587 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Portland and surrounding areas · On-site visits included · Free estimate within 24h
Portland Metal Roofing is a team of local certified professionals based in Portland. We respond quickly in Portland and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (971) 754-2587⭐⭐⭐⭐⭐ 4.9/5 · 181 verified Google reviews
“We had a carport built and wanted a metal roof on it instead of shingles, and Portland Metal Roofing delivered exactly what we pictured. They laid a standing seam panel over the whole structure and the finish looks fantastic next to the house. The crew of four knocked it out in two days and hauled away every scrap.”
Metal Roof Over Shingles (Retrofit)
“Our covered porch was leaking at the edge where the old panels met the wall, and they came out and fixed the flashing and resealed everything in one afternoon. No more drips, and the price was fair.”
Metal Roof Repair
“Our red barn had rusted-through panels and we needed it done before hay season. They replaced the whole roof with corrugated panels, re-fastened the trim, and even added snow guards since we get ice buildup. Walked the site with me afterward and left it spotless.”
Commercial & Agricultural Metal Roofing
“We went with a standing seam metal roof on our house and I'm honestly relieved we did. The crew was careful, the seams are perfectly straight, and they cleaned up so well you couldn't tell anyone had been there. Two neighbors have already asked for their number.”
Standing Seam Metal Roofing
“Had them out to fix the roof venting on our metal roof after a bad install by someone else. They re-flashed around the vent and sealed it properly. Took a little longer to schedule than I'd hoped, but the work itself is solid.”
Metal Roof Repair
“Replaced our old metal roof with new stone-coated steel panels and the house looks completely different. They tore off the old roof, fixed a few soft spots around the chimney flashing, and had it done in three days. Really impressed with how tidy the yard was after.”
Metal Roof Replacement
“Our wood-sided house needed a roof that matched the character of the place, so we went with metal shingles and I couldn't be happier. The crew knew exactly how to work around the gables and the finished look is beautiful.”
Metal Shingle Roofing
“Brand new metal roof on our house and it's been through two big rainstorms already with zero issues. They replaced a couple of skylight seals while they were up there and threw in snow guards without charging extra. Only gripe is they were booked out a few weeks, but worth the wait.”
Metal Roof InstallationReal photos of our work in Portland · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard panel installation | Starting at $8/sq ft | Includes tear-off, synthetic underlayment, standard flashing and cleanup on an accessible roof. |
| Standing seam installation | Starting at $12/sq ft | Concealed fasteners and raised seams; price moves with pitch, panel width and trim complexity. |
| Metal shingle or stone-coated steel | Starting at $10/sq ft | Stamped or granule-coated panels; cost rises with profile detail and roof cut-up. |
| Copper and specialty metal | On estimate | Material cost and detailing vary widely, so we price copper and zinc after an on-site look. |
| Travel | Included | In Portland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (971) 754-2587, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation, standard gable | Starting at $10/sq ft | Includes tear-off, underlayment, clips, panels, and standard flashings; pitch and panel width move the rate. |
| Standing seam on steep or cut-up roof | Starting at $13/sq ft | Covers steep-pitch staging, extra valley and chimney flashing, and more panel cuts per square. |
| Standing seam with snow guards | On estimate | Guard layout depends on roof pitch, entry locations, and how much snow your slope holds. |
| Travel | Included | in Portland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (971) 754-2587, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener replacement (corrugated or R-panel) | Starting at $9/sq ft | Full tear-off, deck inspection and basic flashing included; pitch and access move the price |
| Standing seam replacement | Starting at $14/sq ft | Concealed fasteners, premium underlayment and new flashing; roof complexity and panel gauge raise it |
| Metal shingle or stone-coated steel replacement | Starting at $13/sq ft | Profile-matched system over new underlayment; steep gables and dormers add labor |
| Deck repair found during tear-off | On estimate | Priced per sheet after the deck is exposed; soft sheathing near eaves and valleys is common |
| Complex or large-scale job | On estimate | Multiple rooflines, historic review or commercial scope need an on-site look before a number |
| Estimate | Free | On-site inspection and written scope, response within 24 hours at (971) 754-2587 |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over one layer, sound deck | Starting at $7/sq ft | Includes slip sheet, underlayment, new flashing and panel install over one existing shingle layer. |
| Retrofit with partial deck repair | Starting at $9/sq ft | Adds replacement of soft sheathing and rot found at eaves, valleys or around penetrations. |
| Standing seam or stone-coated steel retrofit | Starting at $11/sq ft | Premium profiles and hidden fasteners raise material cost and install time per square. |
| Steep or complex roof retrofit | On estimate | Steep pitches, multiple valleys and limited access need an on-site look before pricing. |
| Travel | Included | In Portland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (971) 754-2587, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Pipe boot or vent penetration reseal | Starting at $450 | Includes removal of the failed boot, new collar and sealant, and water test at the penetration. |
| Limb dent or small panel replacement | Starting at $850 | Covers one to two panels, new fasteners and sealant; pitch and roof height move the price. |
| Screw replacement and re-fastening | Starting at $650 | Priced per roof section; number of backed-out screws and panel length drive the total. |
| Flashing rebuild at chimney or skylight | Starting at $1,200 | Includes new step flashing, counterflashing and sealant; access and flashing length set the scope. |
| Storm or impact damage, multiple areas | On estimate | Needs an on-site look to map all breaches, check decking and document for insurance. |
| Estimate | Free | Response within 24 hours at (971) 754-2587, no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor leak repair (fasteners, pipe boot) | Starting at $450 | Includes diagnosis and repair of a single accessible leak point, plus a written summary of the fix. |
| Flashing repair or replacement | Starting at $650 | Covers chimney, skylight, or wall flashing repair, with cost rising for custom fabrication or steep access. |
| Widespread fastener and washer replacement | Starting at $900 | Priced per zone on exposed-fastener roofs, with total driven by roof size and how many fasteners have failed. |
| Standing seam or stone-coated steel repair | On estimate | Seam and panel repairs need an on-site look because the method and material cost vary widely by profile. |
| Emergency tarping after storm | Starting at $350 | Covers same-day stabilization in Portland and surrounding areas, with permanent repair quoted separately. |
| Estimate | Free | Response within 24 hours at (971) 754-2587, with no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot screw replacement | Starting at $750 | Covers a typical single-story roof with scattered backed-out screws, new washers, and a water test. |
| Full roof re-fastening | From $1,450 | Replaces every fastener on a set pattern when washers have failed across the whole roof. |
| Steep or tall roof | On estimate | Height and pitch in the West Hills or Eastmoreland add setup, safety gear, and labor time. |
| Barn or shop re-fastening | On estimate | Long panel runs on acreage drive up fastener count, so the crew measures before quoting. |
| Travel | Included | In Portland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (971) 754-2587, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel installation | Starting at $5.50/sq ft | Includes panels, fasteners, closures, and standard trim on a prepared deck or purlins |
| R-panel or 5V crimp installation | Starting at $6.25/sq ft | Stronger ribbed profile for workshops and barns, priced by gauge and panel length |
| Over existing roof (retrofit) | Starting at $7.00/sq ft | Includes purlin framing over existing shingles plus panels, flashing, and closures |
| Structural prep or complex flashing | On estimate | Deck repairs, slope correction, and custom flashing need an on-site look before pricing |
| Travel | Included | in Portland and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (971) 754-2587, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Architectural shingle profile installed | Starting at $9/sq ft | Includes tear-off, synthetic underlayment, and standard flashings; steep pitch or multiple valleys raises the rate |
| Shake or slate profile installed | Starting at $11/sq ft | Includes textured steel panels and custom valley work; complex roof geometry and dormers move the price up |
| Heavy-gauge steel shingle system | Starting at $13/sq ft | Includes thicker panels and high-wind fastening for exposed foothill sites; tree cover and access add to labor |
| Roof-over retrofit (limited by code) | On estimate | Needs an on-site look to confirm existing layers, deck condition, and local code limits before pricing |
| Travel | Included | in Portland and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (971) 754-2587, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel roof installation | Starting at $9/sq ft | Includes tear-off, underlayment, flashing, and panels; roof complexity and pitch move the price. |
| Stone-coated steel over existing shingles | Starting at $7/sq ft | Includes underlayment and panels over one layer; code limits layers and deck condition matters. |
| Complex or steep-pitch roof | On estimate | Multiple valleys, dormers, and steep pitches need an on-site look before we quote. |
| Deck repair and flashing | On estimate | Soft sheathing, skip sheathing, and chimney or skylight flashing are priced after inspection. |
| Travel | Included | In Portland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (971) 754-2587, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper porch or bay window cap | Starting at $20/sq ft | Includes shop-formed pans and soldered seams; small jobs carry a higher fabrication share. |
| Zinc standing seam accent roof | Starting at $24/sq ft | Includes pre-weathered zinc, concealed fasteners, and custom trim; pitch and access move the price. |
| Full architectural copper roof | On estimate | Scope, roof size, profile complexity, and staging needs require an on-site look before pricing. |
| Custom flashing and crickets | On estimate | Chimney and skylight tie-ins priced per detail after we measure the existing conditions. |
| Travel | Included | In Portland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (971) 754-2587, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Light prep and single coat | Starting at $2.50/sq ft | Basic moss removal and one acrylic coat on a simple low-slope roof with light chalking. |
| Full prep and two-coat system | Starting at $3.75/sq ft | Moss and rust treatment, priming, and two finish coats on a typical pitched residential roof. |
| Heavy corrosion or steep access | Starting at $5.00/sq ft | Rust converter, spot priming, and extra labor on steep or tree-obstructed roofs. |
| Commercial or agricultural coating | On estimate | Large R-panel and corrugated roofs need an on-site measurement and fastener survey first. |
| Travel | Included | In Portland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (971) 754-2587, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Skylight re-flash (single unit) | Starting at $600 | Includes removal of old flashing, new bent pan, and water test on one skylight curb. |
| Chimney flashing repair | Starting at $850 | Covers step and counter-flashing replacement, sealant renewal, and inspection of the cricket. |
| Chimney cricket fabrication and install | Starting at $1,200 | Bent metal cricket built to the chimney width, plus new flashing on the uphill side. |
| Valley or wall transition repair | Starting at $700 | Removes failed metal, installs new valley or step flashing, and checks underlayment condition. |
| Complex or multi-point repair | On estimate | Multiple leak points, steep access, or historic masonry need an on-site look before pricing. |
| Estimate | Free | Response within 24 hours at (971) 754-2587, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snow guards over one entry or walkway | Starting at $1,200 | Includes layout, guards, clamps or brackets, and sealing for a single protected zone. |
| Snow rails across a front slope | Starting at $1,800 | Includes rail system, mounting hardware, and sealing; roof height and pitch move the price. |
| Full roof guard layout with gutter reinforcement | On estimate | Needs an on-site look at panel type, pitch, drop zones, and gutter capacity before pricing. |
| Ice dam and eave protection | On estimate | Priced after inspection of valleys, eaves, and underlayment condition. |
| Travel | Included | in Portland and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (971) 754-2587, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof walk, photo documentation, and written repair-versus-replacement assessment included at no cost. |
| Minor repair (screws, flashing, ridge cap) | Starting at $350 | Covers re-fastening, screw replacement, and small flashing repairs; access and roof pitch move the price. |
| Panel section replacement | Starting at $850 | Includes matching panel section, seam re-crimp or re-lap, and underlayment check; roof height and panel profile affect cost. |
| Deck and underlayment repair | On estimate | Needs an on-site look because rot extent and sheathing access vary widely under storm-damaged panels. |
| Emergency tarping | Starting at $450 | After-hours response and temporary weatherproofing; urgency and roof access drive the final figure. |
| Insurance documentation package | Included | Photos, measurements, and written scope provided with every repair estimate at no extra charge. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard walk-over inspection | Free estimate | Covers fastener, seam, and flashing review with photos and a written summary for most roofs. |
| Exposed-fastener audit | Starting at $250 | Screw-by-screw review on corrugated and R-panel roofs, priced by roof size and access. |
| Pre-sale or insurance report | Starting at $350 | Formal written condition report with photos and remaining service life for third parties. |
| Complex or steep-pitch roof | On estimate | Steep pitches, multiple chimneys, and tight access need an on-site look before pricing. |
| Travel | Included | In Portland and surrounding areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (971) 754-2587, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard run | Starting at $9/linear ft | Includes on-site forming, hangers, downspout and cleanup; height and roof pitch raise the rate. |
| Steel gutter for exposed fastener roofs | Starting at $12/linear ft | Heavier gauge for long runs and snow load, with sealed fasteners through the rib or flange. |
| Copper or zinc half-round | Starting at $28/linear ft | Soldered or riveted sections to match specialty metal roofs; material cost drives the figure. |
| Debris guard installation | Starting at $4/linear ft | Stainless mesh or perforated cover fitted to the lip; priced per foot on top of the gutter run. |
| Complex or large-scale job | On estimate | Steep slopes, staging needs, fascia repair and multiple downspout routes need an on-site look first. |
| Travel and estimate | Included and free | No mileage fee in Portland and surrounding areas; free written estimate, response within 24 hours. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Commercial metal roof inspection and estimate | Free | On-site walk-through, panel and fastener assessment, written scope, no obligation to book. |
| Exposed-fastener R-panel or corrugated install | Starting at $4.50 per sq ft | Screw-down panels, closures and basic flashing for barns, shops and carports. |
| Standing seam commercial install | Starting at $9.00 per sq ft | Concealed clips, long panel runs and full flashing detail; pitch and access move the number. |
| Tear-off and deck repair | On estimate | Old roof removal, disposal and any purlin or deck repair found underneath, priced after inspection. |
| Storm or ice damage repair | On estimate | Panel replacement and re-fastening after limb or ice damage; urgency and access affect the price. |
| Travel | Included | In Portland and surrounding metro areas, no separate call-out or mileage fee. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Portland want a crew that understands the local climate and building stock, not a call center. Portland Metal Roofing is your local source for Metal Roof Installation, replacement, re-roof, and repair on homes throughout Portland, Beaverton, Hillsboro, Gresham, Lake Oswego, and the surrounding areas. We work on steep gable roofs, heavily treed lots, and high-exposure hillside properties, and we know the large stock of aging screw-down roofs that are now due for fastener service.
From Craftsman bungalows in Irvington and Sellwood to mid-century ranches in Southeast Portland and newer subdivision homes in Happy Valley and Tualatin, our network of licensed, insured local contractors matches the right metal system to your roof pitch, structure, and budget. Whether you need a full standing seam install or a targeted repair, we give straight answers and honest scopes. Call (971) 754-2587 or request a free estimate to get started.
Metal roofs are durable, but they are not maintenance-free. The most common cause of leaks on older exposed-fastener roofs is fasteners backing out as the EPDM sealing washers dry, shrink, and crack. Once that seal fails, water works past the screw and into the roof assembly. Seam separation from thermal movement, failed pipe boots, and flashing gaps at chimneys, skylights, and valleys are also frequent culprits. Wind-lifted panels after a storm and punctures from fallen limbs are common in the West Hills and foothills, where Douglas firs and bigleaf maples overhang roofs.
Ignoring these issues is costly. Water often tracks along purlins and decking far from the point of entry, leading to rotted sheathing, soaked insulation, and interior damage that far exceeds the cost of the original repair. That is why we take a careful, honest approach to Metal Roof Leak Repair: we find the actual source, not just the stain on your ceiling.
Before recommending replacement, we evaluate whether a full Screw Replacement & Re-Fastening service can restore your roof to watertight condition. On many 15 to 30 year old screw-down roofs, replacing the fasteners and sealing washers is a fraction of the cost of a new roof and buys years of reliable service. If the decking or panels are too far gone, we will tell you plainly. Call (971) 754-2587 for a repair assessment or contact us online.
We install and service the full range of metal roofing systems. Standing Seam Metal Roofing uses concealed clips and hidden fasteners for a clean, premium look with no exposed screws to maintain. Corrugated & Ribbed Panel Roofing is the economical workhorse for barns, workshops, and cabins, though the fasteners require periodic service. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing in shake and slate profiles, and Copper & Specialty Metal Roofing for porch and bay window accents.
The honest comparison: standing seam costs more upfront but has no exposed fasteners to service, while screw-down costs less and needs fastener maintenance over its life. We also offer Metal Roof Over Shingles (Retrofit) when the existing deck is sound, and full tear-off when it is not. We match the system to your home, not the other way around.
Metal roof projects in Portland are typically quoted per square foot for installations, while repairs are often priced as flat-rate jobs. Pricing depends on the panel system and metal gauge, roof pitch and complexity, whether we tear off or recover, decking condition, and site access. We provide typical ranges during your estimate, but final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, though this is not a guarantee.
For a clearer picture of what drives cost, visit our pricing page. To get a project-specific number, request a free estimate or free roof inspection. We will walk you through the options and give you a straightforward recommendation, including when a repair is the smarter financial choice.
If a storm damages your metal roof, we can inspect the damage and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, and coverage decisions rest with your carrier. We make no promise that a claim will be approved. Our role is to document the condition of the roof accurately and provide a clear scope of work.
On permits: in most jurisdictions, a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and inspection thresholds differ. Historic district or HOA design review can also affect panel profile and color choices. We do not provide legal or code advice. Requirements vary, so always verify with the Portland building or planning department before starting your project. For documentation or to schedule an inspection, contact us.
Ready to get started? Portland Metal Roofing serves in Portland and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Portland · Response within 24h · No commitment · ☎ (971) 754-2587
Your Free Quote Request