Serving the Portland area  ·  (971) 754-2587  ·  Open Mon-Sun 7am-7pm
📞 (971) 754-2587 Free Quote

Metal Roofing in Sherwood, OR (97140) · Local Professionals

Portland Metal Roofing · Fast response in Sherwood and the Portland area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+181Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Sherwood still feels like a small town even with all the new subdivisions, and that mix shows up on the roofs. You've got 1990s and 2000s two-story homes with worn composition shingles off Highway 99W, older farmhouses and barns out toward the Tualatin Valley edges, and everything in between.

We're Portland Metal Roofing, and we work Sherwood and ZIP 97140 because we know what these roofs go through: wet winters, moss on shaded north slopes, and wind that rolls across the open farmland. Whether you're near Sherwood High School or out on a rural acreage, we give you a straight answer and a free on-site look.

Metal Roofing in Sherwood (97140)

Sherwood sits at the edge of the Tualatin Valley, and the work here reflects that. In the newer subdivisions off Brookman Road and Sunset Boulevard, lots are tight, fences and landscaping are close, and roof pitches are often steep, so staging and fall protection take planning. Out toward the farm edges, you get long barns and shops with low-slope corrugated or R-panel roofs, plus mature Douglas firs dropping needles that trap moisture and feed moss. The clay-heavy soil and winter water table mean gutters and downspouts have to move a lot of water away from foundations fast. And the open ground west of town lets wind hit roofs harder than in the city, which is why we check fastener patterns and panel attachment closely.

Our team has installed, repaired, and replaced metal roofs across the Portland area, from standing seam on modern farmhouses to stone-coated steel that mimics shake on ranches. We know which profiles hold up to Sherwood's rain and wind, and we know the local permit and inspection rhythm.

Our services in Sherwood

How a Job Works in Sherwood

Step 1: You call (971) 754-2587 or request a free estimate. We schedule an on-site assessment, look at your roof, attic, flashing, and gutters, and talk through options. You get a written scope and price before anything starts.

Step 2: We pull the required permits with the city or county, coordinate with your HOA if there is one, and plan delivery and staging around your driveway and lot. On tight subdivision lots we keep materials off the street and protect landscaping. Then we tear off or retrofit, install underlayment and flashing, and set panels or shingles with the right fasteners for Sherwood's wind exposure.

Step 3: We clean up daily, magnet-sweep for nails, haul away debris, and do a final walkthrough with you. We don't leave until you've seen the finished work and know how to care for it.

Pricing in Sherwood depends on roof size, pitch, access, and condition. As a ballpark: corrugated or ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) around $7, standard metal roof installation around $8, metal roof replacement around $9, and standing seam around $10. Stone-coated steel and metal shingles start around $9, copper and specialty metals around $20. Repairs and leak fixes start around $450, screw replacement and re-fastening around $750, flashing and chimney or skylight repair around $600, and gutters for metal roofs around $9 per linear foot. Storm and wind damage inspections are free. For a real number on your Sherwood home, call (971) 754-2587 and we'll come look.

My Sherwood subdivision has an HOA. Can I still get a metal roof?
Usually yes, but you need approval first. Many Sherwood HOAs restrict panel profile and color, often requiring standing seam or a shake-profile stone-coated steel in muted tones. We provide product specs, color samples, and installation details you can submit. We've worked with HOAs around Sherwood and can help you put together a clean application.
A storm just took panels off my barn near Sherwood. How fast can you get out?
Call (971) 754-2587 and we'll schedule a free storm damage inspection as soon as possible, often within a day or two depending on volume. We can tarp or secure openings to prevent further water damage, then give you a written repair estimate. For active leaks, we prioritize those calls.
What does a typical metal roof replacement cost on a Sherwood two-story home?
Most Sherwood two-story homes run between 1,800 and 2,800 square feet of roof area. At around $9 per square foot for replacement, that's roughly $16,000 to $25,000, depending on pitch, tear-off layers, and flashing complexity. Standing seam runs higher, around $10 per square foot. We give you an exact price after a free on-site measure.
Do I need a permit for a metal roof in Sherwood, and who handles it?
Yes, a roofing permit is commonly required for replacement or re-roof, and requirements vary by jurisdiction. We handle the permit application and inspections as part of the job. We confirm current rules with the city or county before work starts, so you don't have to chase paperwork.
My neighbor says my new metal roof will dump water on their property. What are the rules?
Oregon law and local codes generally require you to manage roof runoff on your own property, not direct it onto a neighbor's. We design gutters and downspouts to carry water to appropriate drainage, and we can adjust placement if there's a property line concern. If your HOA has rules about drainage or setbacks, we review those too.
Are you fully insured for work on my Sherwood property?
Yes. We carry general liability insurance and workers' compensation coverage for our crews.
How do I keep moss and fir needles off my metal roof in Sherwood?
Fir needles and leaves trap moisture, especially on shaded north slopes. We recommend annual gutter cleaning and a soft-brush sweep of valleys and behind chimneys, plus trimming overhanging branches. Never pressure-wash a metal roof. If you see moss or heavy debris, call us for an inspection; we can clean it safely and check fasteners and sealant at the same time.
Why choose us?

Trusted professionals in Portland

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Portland

All your work handled by qualified professionals in Portland

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

181+ Verified Client Reviews in Portland

⭐⭐⭐⭐⭐ 4.9/5 · 181 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Portland · Response within 24h · No commitment · ☎ (971) 754-2587

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Portland ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm