Serving the Portland area  ·  (971) 754-2587  ·  Open Mon-Sun 7am-7pm
📞 (971) 754-2587 Free Quote

Metal Roofing in Wilsonville, OR (97070) · Local Professionals

Portland Metal Roofing · Fast response in Wilsonville and the Portland area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+181Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Wilsonville packs a lot into a small footprint: the Willamette River on the west, I-5 running through the middle, and neighborhoods like Charbonneau and Villebois sitting on some of the flattest, wettest ground in the valley. Most of the housing stock dates from the 1990s through the 2020s, so you have young roofs on tight subdivision lots, plus older farm buildings and river-edge homes that take steady rain and moss year after year.

Homeowners in 97070 call Portland Metal Roofing because we know how Wilsonville weather actually behaves. The rain comes cool and steady from October to May, moss and algae build on shaded north slopes, and the dry summers leave needle litter and fir cones sitting in valleys and gutters. We are fully insured, we handle metal roof inspection and installation across Wilsonville and the surrounding Portland area, and we give you a straight answer about what your roof needs.

Metal Roofing in Wilsonville (97070)

Wilsonville sits where the Willamette meets the Columbia lowlands, and that means flat, poorly drained lots in places like Charbonneau and Villebois, where roof runoff has nowhere to go fast. The newer subdivisions off Wilsonville Road and Boones Ferry Road have steep gable roofs and tight side yards, so staging materials and getting a ladder set safely takes planning. Older properties near the river and along the Boeckman Creek corridor have mature Douglas firs and bigleaf maples overhanging the roof, which means needle litter, moss, and the occasional fallen limb. We see a lot of failed fasteners and separated seams on metal roofs that were installed without proper underlayment or ventilation, especially on the low-pitch patio covers and shop roofs common on the west side of town.

Our team has worked metal roofs across the Portland area for years, from standing seam on modern farmhouse builds to corrugated R-panel on barns and workshops out toward Sherwood and the Tualatin Valley. In Wilsonville we handle everything from a free inspection on a 1990s subdivision home to a full replacement on a river-edge property where access is tight and the weather does not cooperate. We pull the permits, we coordinate with your HOA if you have one, and we keep the job site clean from start to finish.

Our services in Wilsonville

How a Job Works in Wilsonville

Step 1: You call (971) 754-2587 or request a free estimate online. We schedule an on-site assessment, usually within a few days, and we walk the roof with you. We check fasteners, seams, flashing, and attic ventilation, and we take photos so you can see exactly what we see. You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the roofing permit with the city of Wilsonville and schedule the work. On tight subdivision lots in Villebois or Charbonneau we plan material delivery and dumpster placement so we are not blocking neighbors or the driveway. If your home is in an HOA, we help you submit the panel profile and color for approval before we order materials. Most residential metal roof installations take a few days to a week depending on the size and pitch of the roof.

Step 3: We clean up every day and do a final walkthrough with you when the job is done. We magnet-sweep the lawn and driveway for screws and metal shavings, haul away all old materials, and make sure your gutters and downspouts are clear. You get a written warranty and a roof that is ready for the next rainy season.

Metal roofing in Wilsonville is priced by the square foot, and the numbers depend on the material, the pitch, the access, and the condition of the existing roof. Corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation starts at $8 per square foot, and standing seam starts at $10 per square foot. A metal roof over shingles (retrofit) starts at $7 per square foot, and a full replacement starts at $9 per square foot. Repairs and leak repairs start at $450, screw replacement and re-fastening starts at $750, and flashing, chimney, and skylight repair starts at $600. Gutters for metal roofs start at $9 per linear foot. We give free estimates and free inspections, so call (971) 754-2587 and we will give you a real number for your Wilsonville property, not a guess over the phone.

My roof in Charbonneau has moss growing on the north slope. Is that a sign I need a new metal roof or just a cleaning?
Moss on a north-facing slope is common in Wilsonville because those roofs stay shaded and damp through the rainy season. On a metal roof, moss usually means debris has built up in the valleys and along the seams, and it can trap moisture against the panels. We start with a free inspection to check the fasteners, seams, and flashing. If the metal is still sound, a cleaning and coating may be all you need. If the panels are failing, we will show you photos and give you a replacement quote.
A storm just knocked a limb onto my roof near Boeckman Creek. How fast can you get out for an emergency repair?
We prioritize storm and wind damage calls in Wilsonville, especially when there is an active leak or a puncture. Call (971) 754-2587 and we will schedule the soonest available inspection, often the same day or next day depending on the weather. We can tarp the area to stop water intrusion and then give you a written repair estimate. We do not promise a specific arrival time before we have seen the damage, but we move quickly on active leaks.
What does a typical metal roof replacement cost for a 1990s two-story home in Wilsonville?
For a typical 2,000 to 2,500 square foot two-story home in a Wilsonville subdivision, a metal roof replacement usually runs between $18,000 and $30,000 depending on the material and the complexity of the roof. Standing seam is at the higher end, corrugated panel is at the lower end, and factors like chimney flashing, skylights, and tight lot access can add to the cost. We give free on-site estimates so you get a number that fits your actual roof, not a range from a website.
Do I need a permit from the city of Wilsonville to replace my roof, and does my HOA need to approve the color?
Yes, the city of Wilsonville generally requires a roofing permit for a full replacement or re-roof, and the requirements can vary depending on the scope of work. We pull the permit for you and schedule the inspection. If you live in an HOA, such as in Villebois or Charbonneau, you will also need design review approval for the panel profile and color before we order materials. We help you prepare the submittal so there are no surprises.
My neighbor's tree hangs over my property line in Wilsonville. Can I trim it before you install my new metal roof?
In Oregon, you generally have the right to trim branches that extend over your property line, but you cannot damage the tree or trespass to do it. We recommend talking with your neighbor first and documenting the conversation. If branches are rubbing the roof or dropping debris that clogs your gutters, trimming them back will help your new metal roof last longer. We can point out the problem areas during your free inspection, but we do not handle tree work ourselves.
Is your crew covered by insurance if someone gets hurt working on my Wilsonville property?
Yes. We are fully insured with general liability and workers' compensation coverage. That means if a crew member is injured on your property, their medical costs are covered by our workers' compensation policy, not your homeowner's insurance.
What should I do to maintain my metal roof in Wilsonville between rainy seasons?
The most important thing is to keep debris off the roof, especially in the fall when Douglas fir needles and leaves pile up in valleys and behind chimneys. We recommend a professional inspection every two to three years, and a cleaning if you see moss or heavy needle buildup. Check your gutters in late fall and again in early spring. If you have snow guards or ice protection, make sure they are secure before winter. A little maintenance goes a long way in our climate.
Why choose us?

Trusted professionals in Portland

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Portland

All your work handled by qualified professionals in Portland

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

181+ Verified Client Reviews in Portland

⭐⭐⭐⭐⭐ 4.9/5 · 181 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Portland · Response within 24h · No commitment · ☎ (971) 754-2587

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Portland ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm