Serving the Portland area  ·  (971) 754-2587  ·  Open Mon-Sun 7am-7pm
📞 (971) 754-2587 Free Quote

Metal Roofing in Hillsboro, OR (97124) · Local Professionals

Portland Metal Roofing · Fast response in Hillsboro and the Portland area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+181Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Hillsboro is where the Tualatin Valley meets the West Hills, and the housing stock shows it: 1990s to 2020s two-story subdivision homes with composition shingle roofs in places like Reed's Crossing and AmberGlen, plus farm-edge lots with barns and workshops out toward Jackson Bottom and the Helvetia area. If you live in 97124, you already know the mix: newer roofs under big Douglas firs, older ranches with low slopes, and outbuildings that take a beating from winter rain and summer sun.

Homeowners here call Portland Metal Roofing because we understand that mix. We have replaced shingle roofs on tight subdivision lots near Hillsboro High School and installed standing seam on farmhouse builds off Highway 26. When a roof starts leaking at a fastener or a seam opens up after a windstorm, we are the crew that shows up with the right panels and the insurance paperwork to back it up.

Metal Roofing in Hillsboro (97124)

Hillsboro sits at the edge of the Tualatin Valley, where flat farmland meets the forested West Hills. That means two very different roofing environments. In the newer subdivisions around 97124, you have tight lots, HOA design rules, and roofs that are shaded by mature firs and maples for much of the day. Moss, algae, and needle litter build up fast on north-facing slopes, and that is where we see the most premature failures on shingle roofs. Out toward Jackson Bottom and the farm edges, you have barns and workshops with low-pitch corrugated or R-panel roofs that need re-fastening and leak repair after years of freeze-thaw cycles and summer heat.

Our team has worked on both. We know how to stage a job on a narrow subdivision street without blocking your neighbor's driveway, and we know how to handle a long agricultural roof where access is easy but the panels are big and the wind uplift is real. We also deal with the local drainage: Hillsboro's clay-heavy soils and winter rain mean gutters and downspouts have to be sized right, or you get water in the crawlspace. We have seen it all over the years, from the older homes near downtown Hillsboro to the new builds off Cornelius Pass Road.

Our services in Hillsboro

How a Job Works in Hillsboro

Step 1: You call us at (971) 754-2587 or send a request online. We schedule a free on-site assessment, usually within a couple of days. We walk the roof, check the flashing, fasteners, and seams, and look at the attic and gutters if accessible. You get a written estimate with options, not a high-pressure sales pitch.

Step 2: Once you approve, we pull the permit through the City of Hillsboro and schedule the work. On tight subdivision lots, we coordinate with your HOA if there are design rules for panel profile or color. For farm buildings, we plan around your operations so we are not in the way during harvest or livestock hours. Most residential metal roof installations take two to four days, depending on the size and complexity.

Step 3: We clean up every day, and at the end we do a final walkthrough with you. We use a magnet sweep for nails, haul away all old materials, and make sure your gutters and downspouts are clear. You get a written warranty and a roof that is ready for the next rainy season.

Pricing in Hillsboro depends on the roof size, pitch, access, and condition. For a typical 1,800 to 2,200 square foot ranch or two-story home, metal roof installation starts around $8 per square foot, standing seam starts around $10 per square foot, and a full replacement starts around $9 per square foot. If you are retrofitting over existing shingles, that starts around $7 per square foot, but keep in mind that code limits how many layers you can have. Repairs start at $450, and leak repairs also start at $450. Screw replacement and re-fastening for a metal roof starts at $750. For barns and workshops, corrugated and ribbed panel roofing starts at $5.50 per square foot. We give free estimates, so call (971) 754-2587 and we will give you a real number for your specific roof.

My house is in the Reed's Crossing area and the roof is shaded by big firs. Will a metal roof still get moss?
Metal roofs resist moss better than asphalt shingles, but in Hillsboro's shaded neighborhoods, pollen and needle litter can still collect in the seams and valleys. We recommend a standing seam profile with a factory finish that resists algae, and we can add a coating if moss is a concern. Regular cleaning, especially on north slopes, keeps it looking new.
A windstorm just lifted some panels on my barn off Jackson School Road. How fast can you get out?
We prioritize storm and wind damage calls in the Hillsboro area. Call us at (971) 754-2587 and we will schedule an inspection, often within 24 to 48 hours depending on the season. We can tarp or secure the area temporarily if needed and give you a repair estimate on the spot.
What does a metal roof cost for a typical 2,000 square foot house in 97124?
For a 2,000 square foot home with a moderate pitch, installation typically starts around $8 per square foot, so you are looking at roughly $16,000 and up for a basic corrugated or ribbed panel roof. Standing seam runs closer to $10 per square foot, and stone-coated steel or metal shingles start around $9 per square foot. Access, roof complexity, and whether we remove the old roof all affect the final price.
Do I need a permit from the City of Hillsboro for a metal roof replacement?
Yes, a roofing permit is commonly required for a full replacement or re-roof in Hillsboro, and the requirements can vary depending on the scope of work. We handle the permit application for you and make sure the work meets local code. You can check the City of Hillsboro website for general information, but we will walk you through the specific requirements for your project.
My HOA has rules about roof color. Can you help with approval?
We work with HOAs in Hillsboro regularly. We can provide color samples and manufacturer specs for your architectural review committee, and we will coordinate scheduling so the installation does not conflict with HOA rules. If you are in a historic district, we can also advise on panel profiles that meet design guidelines.
Are you fully insured for work on my Hillsboro property?
Yes, Portland Metal Roofing is fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Hillsboro's climate?
In Hillsboro, the main maintenance is keeping gutters and valleys clear of fir needles and leaves, especially before the rainy season starts in October. We recommend an annual inspection to check fasteners and seals, particularly on roofs with trees nearby. A coating every 10 to 15 years can extend the life of the finish, and we offer that service starting at $2.50 per square foot.
Why choose us?

Trusted professionals in Portland

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Portland

All your work handled by qualified professionals in Portland

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

181+ Verified Client Reviews in Portland

⭐⭐⭐⭐⭐ 4.9/5 · 181 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Portland · Response within 24h · No commitment · ☎ (971) 754-2587

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Portland ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm